wireshark lab 13

Need your ASSIGNMENT done? Use our paper writing service to score better and meet your deadlines.


Order a Similar Paper Order a Different Paper

Please complete each section and all the requirements, some want screenshots and the others wants the answers completed. I attached a document that has all of the stuff that will be needed to completed everything but it wouldnt all show up so I uploaded the document that has everything needed. but also its from the book that has pictures as guidance.

Chapter 2 Reading – How Computers Find Each Other On Networks

Go to 2-6e Case Projects, and complete Case Project 2-2, Install and Use Wireshark

You must complete this assignment before the assignment listed below, otherwise you will not receive credit for the Wireshark assignment.

Lab Points: 1

Using MS Word only, record your answers.Provide screen shots for each step of your work. Save the file as

CaseProj2-2.docx. Attach and submit the document on Blackboard.

Not Applicable

On Blackboard, under the link Our Classroom|Labs, open the file called Lab1_WiresharkLab AU18 and follow all instructions.

Lab Points: 14

Using MS Word only, record your answers.Save the file as Lab1WiresharkXXX.docx Substitute your first, middle, and last name initials in place of XXX. Attach and submit the document on Blackboard.

.

You must complete and submit the first lab assignment “Case Project 2-2” listed in the

document “CSCI1152_Lab1_7ED” on Blackboard. You will not receive credit for this

assignment if you do not complete Case Project 2-2 first. Read all instructions first.

General Instructions:

1. Open the file CSCI1152_Lab1_7ED under the link Our Our Classroom|Week 2|Lab 1

Assignment on Blackboard. Which is listed at the top of this page.

2. Complete the lab assignment Case project 2-2 first. You will not receive credit for this

assignment if you do not complete this assignment.

3. Record your name, today’s date, and instructor name listed at the top of this page.

4. For some exercises, you will need two computers. This assignment does not require a server

and can be performed on a computer.

5. Using MS Word only, include screen shots for each step. Number each step in your screen

shots.

6. Points will be deducted if you do not follow these instructions.

COLUMBUS STATE COMMUNITY COLLEGE

COMPUTER SCIENCE DEPARTMENT

CSCI 1152 – NETWORKING CONCEPTS (NETWORK+)

LAB #1 – WIRESHARK LAB EXERCISES

2

Lab Objective: The objective of this lab is to apply the concepts from the readings and

homework assignment from the Network+ Guide to Networks. You will demonstrate

knowledge of the Wireshark tool to apply the concepts of network traffic, packet analysis, and

flow of protocols within the framework of the OSI model.

1. Record your name, today’s date, and instructor name listed above.

2. Record all answers and screen shots for each Wireshark step in this document.

3. Open Wireshark. You should have Wireshark installed from the first lab assignment

CSCI1152_Lab1_7ED.

4. Download the Wireshark User’s Guide provided on www.wireshark.org. The Wireshark

User’s Guide will help you to answer the questions.

5. Use the Internet to find answers to the questions.

6. The course textbook, Wireshark User’s Guide, and using the Internet will assist you in

answering the questions.

7. This assignment is based on readings from Chapters 1 thru 3 and hands-on activities using

Wireshark.

8. Start this assignment early.

9. Read and follow instructions, complete all steps and answer the questions on pages 3 thru 5.

COLUMBUS STATE COMMUNITY COLLEGE

COMPUTER SCIENCE DEPARTMENT

CSCI 1152 – NETWORKING CONCEPTS (NETWORK+)

LAB #1 – WIRESHARK LAB EXERCISES

3

1. Using Wireshark, write the command to apply a filter to find the IP address on a network

using ARP analysis.

2. Based on your answer to question 1, open Wireshark, create activities which use the ARP

protocol. Execute the filter and provide screen shots in this document for each step. Your

screen shots must show the sender MAC address, sender IP address, destination MAC

address and destination IP address. You will not receive credit if you do not include each step

in your screen shots.

3. Using Wireshark, write the command to apply a filter to verify DNS resolution functionality.

4. Based on your answer to question 3, open Wireshark, and apply the filter. Open a commandline to DOS and execute the utility to verify you can communicate to the website

tcpipguru.com. This must be done from the command-line. You will not receive credit if you

use a browser. Show the response and filter of the website in your screen shots and all screen

shots for the command line utility. You must provide all steps in your screen shots to receive

credit.

Execute the filter and provide screen shots in this document for each step.

5. Using Wireshark, write the command to apply a filter to monitor and display the type field in

the Ethernet header for an IPv4 ether type field. The objective of this command is to monitor

Ethernet packets containing a type of protocol such as IPv4.

6. Based on your answer to question 5, open Wireshark, and create activities for the protocol.

Execute the filter and provide screen shots in this document for each step. Make sure you

open each section and include screen shots to show the IPv4 Type field that was filtered.

You will not receive credit if you do not include each step in your screen shots.

COLUMBUS STATE COMMUNITY COLLEGE

COMPUTER SCIENCE DEPARTMENT

CSCI 1152 – NETWORKING CONCEPTS (NETWORK+)

LAB #1 – WIRESHARK LAB EXERCISES

4

7. Using Wireshark, write the command to apply a filter to monitor and display the type field in

the Ethernet header for an ARP ether type field. The objective of this command is to monitor

Ethernet packets containing a type of protocol such as ARP.

8. Based on your answer to question 7, open Wireshark, and create activities for the protocol.

Execute the filter and provide screen shots in this document for each step. Make sure you

open each section, and include screen shots to show the ARP Type field that was filtered.

You will not receive credit if you do not include each step in your screen shots.

9. Using Wireshark, write the command to apply a filter which tests latency on a network. The

objective of this command is to test latency on a network using ping. Latency is the roundtrip time (RTT) it takes for a packet to be sent and received.

10. Based on your answer to question 9, in Wireshark perform the following steps. You will need

two computers to complete this exercise.

a. Add a column called “Time of Day”.

b. Execute the command to determine the IP address for both computers.

c. Ping the two computers.

d. Apply the filter, and then stop the capture.

e. Calculate in milliseconds the time difference between the two packets.

f. Write the time difference in milliseconds in the space below.

g. Include the screen shots showing the time between the two packets.

h. You will not receive credit if you do not include each step in your screen shots.

COLUMBUS STATE COMMUNITY COLLEGE

COMPUTER SCIENCE DEPARTMENT

CSCI 1152 – NETWORKING CONCEPTS (NETWORK+)

LAB #1 – WIRESHARK LAB EXERCISES

5

11. Using Wireshark, write the command to graphically view the list of IP addresses accessed or

communicated. Hint: Use the statistics menu.

12. Based on your answer to question 11, open Wireshark, and create activities which generate

statistics. You will not receive credit if you do not include each step in your screen shots.

13. Using Wireshark, write the command to show a graphical view that displays traffic

distribution based on protocols. Hint: Use the statistics menu.

14. Based on your answer to question 13, open Wireshark, and display the graphic. You will not

receive credit if you do not include each step in your screen shot

"Is this question part of your assignment? We can help"

ORDER NOW

Do you need help with this or a different assignment? We offer CONFIDENTIAL, ORIGINAL (Turnitin/LopesWrite/SafeAssign checks), and PRIVATE services using latest (within 5 years) peer-reviewed articles. Kindly click on ORDER NOW to receive an A++ paper from our masters- and PhD writers.

Get a 15% discount on your order using the following coupon code SAVE15


Order a Similar Paper Order a Different Paper